LOOKING FOR NOVASUB?

vLBV300-L - Seascape Subsea BV

  1. Home
  2. Products
  3. Geen categorie
  4. vLBV300-L

vLBV300-L

The vLBV300-L is the extended excursion vLBV system with tether lengths up 2,000 meters (6,000ft) and a minimal 492mm (19.4in)cross section.

Long line excursion capability

The vLBV300-L builds on the standard vLBV300 system with it’s increased tether capability. With tether lengths up to 2,000 meters (6,000ft), small cross section, powerful thrusters and impressive payload the vLBV300-L is the ideal long line penetration or inspection system.

Powerful variable vector thruster configuration

Vectored thruster configuration provides amazing control in all horizontal directions. The vLBV300-L has the unique ability to vary the vector for specific applications. With a standard pulling power of 18.1 kg f (40 pd f) the vLBV300-L easily pulls the long line tether. When conditions are more extreme the operator can adjust the vector to produce 22.5 kg f (50 pd f) of Bollard thrust.

Category: Tag:

Description

Flexible payload/sensor platform

The vLBV300-L is a highly operator customizable system providing a flexible payload capability. Different applications require different sensors as well as mounting configurations. A variety of sonars, NTD sensors and mechanical tools are available to help meet the requirements of the mission.

Built in serial and Ethernet data transfer

As part of the performance of the vLBV300-L are the included communication ports. There are built in ports for Ethernet (100mbps), serial RS232 (115k baud) and serial RS485. Industry standard connectors are installed on the vLBV300-L eBottle for easy connectivity.

Ultra low drag, strong tether

The vLBV300-L uses the low drag, tether that SeaBotix is known for. At 8mm (0.3in) nominal diameter and 100 kg f (220 pd f) working load the tether has minimal impact on the performance. To cope with the longer tether lengths the tether utilizes a multi-mode fiber for data and video. The tether can be attached to the rear or top of the vLBV300-L depending on conditions.

Intuitive control system

Teledyne SeaBotix MiniROV controls have been regarded as the most intuitive of all small ROVs. The vLBV300-L is no different with the user friendly operator control unit and integrated control console.

Specifications

Product Specifications

vLBV
Depth Rating
300 Meters Seawater (MSW) – 1,000 Feet Seawater (FSW)
Length
625 mm – 24.6 in
Width
390 mm – 15.4 in
Height
300, 390 or 430 mm – 11.8, 15.4 or 16.9 in
Diagonal
492, 551 or 580 mm – 19.4, 21.7 or 22.8 in
Weight in Air
18.1 kg – 39.9 lbs
Protection
Polyethylene bumper frame


Thrusters
Thruster configuration
Six (6) Brushless DC thrusters – Four (4) vectored, two (2) vertical. Each thruster is identical and isolated
Bollard Thrust (forward)
18.1-22.5 kg f – 40-50 pd f (variable)
Bollard Thrust (vertical)
9 kg f – 19.8 pd f
Bollard Thrust (lateral)
7.3-15.2 kg f – 16.2-33.5 pd f (variable)


Cameras & Lighting
Camera Tilt
180 degrees
Diagonal Angle of View
65 degrees in water
Camera – Primary
650 TV Lines – Light Sensitivity: 0.1 Lux @ f2.0
Focus
Manual focus control via hand controller.
Video Format
NTSC or PAL
Lighting
2 x 1,080 Lumen LED arrays. Variable intensity via operator control unit.
Tracking forward camera.

Control System
Configuration
Hand controller, monitor and surface power supply built into protective case
Data Channels
4 x RS232/845 (115kb), 3 x 100base/t Ethernet
Monitor
38 cm – 15 in color LCD
Sensors
Heading, depth, temperature, pitch, roll
Auto Functions
Depth, heading, trim, roll compensation


Hand Controller
Length
210 mm – 8.3 in
Width
160 mm – 6.3 in
Height
75 mm – 3 in
Weight
650 grams – 1.4 lbs
Joystick
Single – forward, reverse, rotate left, rotate right, roll left, roll right
Joystick Steps
32
Vertical Thruster
Proportional control knob
Additional Controls
Membrane keypad – thruster gain control, trim, auto depth, auto heading, camera tilt, camera focus, camera switch, light On/Off, light intensity, accessories, video overlay position, power On/Off, programming keypad
Safety
I.P. 64 – splash proof


Surface Power Supply
Length
718 mm – 28.25 in
Width
784 mm – 30.875 in
Height
717 mm – 28.25 in
Weight
31.1 kg – 68.6 lbs
Input Voltage
100-240 VAC
Power Requirement
4,250 Watts maximum
Safety
Isolated input power, circuit breaker, line insulation monitor, leak detector. Meets and exceeds “Code of Practice for the Safe Use of Electricity in Water”
Water Proofing
I.P. 64 – Splash proof


Integrated Control Console
Length
452 mm – 17.8 in
Width
328 mm – 12.9 in
Height
173 mm – 6.8 in
Weight
20 kg – 44 lbs
Input Voltage
100-240 VAC
Power Requirement
3,000 Watts maximum
Safety
Isolated input power, circuit breaker, line insulation monitor, leak detector. Meets and exceeds “Code of Practice for the Safe Use of Electricity in Water”
Water Proofing
I.P. 64 – Splash proof


Tether
Diameter
8 mm – 0.3 in nominal
Length
500-2,000 meters – 1,640-6,000 feet
Working Strength
100 kg f – 220 pd f
Breaking Strength
700 kg f – 1,540 pd f
Strength Member
Kevlar
Buoyancy
Neutral in fresh water – slightly positive in Seawater
Conductors
Twisted pair with shield (power), multi-mode fiber
Reel construction
Heavy duty marine grade materials (stainless steel, Starboard PE)
Reel Capacity
1,000 meters – 3,280 feet


On-Screen Information Display
Information Displayed
Thruster gain settings, light level, Trim On/Off, heading, depth, turns counter, camera angle, water temperature, time, date, user text
User Text
Up to 28 characters
Positioning
Bottom, top or off
Menus
Quick menu, setup, calibrate, diagnostics, options


Spares, Tools and Manuals
Spares Contents
Fastener kit, seal kit, propeller, gel lube, Kluber grease, fuse
Tool Contents
1.5, 2, 3, 4, 5 mm hex ball drivers, #1, #2 Phillips screw drivers, 10 mm socket driver, small straight blade screwdriver, 19 mm open end, vacuum pump
Spare Thruster
Brushless DC thruster assembly
Manuals
Operators manual, service and repair CD-ROM

System Content

vLBV

vLBV vehicle depth rated to 300 MSW – 1,000 FSW
Six (6) Brushless DC thrusters (4 vectored, 2 vertical)
Auto heading, depth and trim
Video overlay
Temperature sensor

Integrated Control System

Protective case fitted with monitor, surface power supply and operator control unit
38 cm (15 in) Color LCD monitor fitted in lid of case – waterproof
vLBV operator control unit – removable from lower tray of integrated console
Sunshade for direct sunlight operation

Tether

500 meters – 1,640 feet of tether
8 mm – 0.3 in diameter
100 kg f – 220 ft/lb working load
700 kg f – 1,540 ft/lb breaking strain
Connectors and strain relief
Heavy duty reel

Cameras & Lighting

600 line exView color camera – 0.001 lux
2 x 1080 Lumen LED arrays tracking color camera
180 degree rotating camera chassis
65 degrees diagonal angle of view in water

Transit Cases

Transit case for vLBV with custom closed cell foam, retractable handle and wheels
Transit case for tethe and reel
Integrated console
Spares, spare thruster, tools and manuals

Spares, Tools & Manuals

Spare thruster assembly
Fasteners, seal kit, props, misc. spares
Tool kit
Vacuum pump
Operators manual
CDROM

Warranty

Two year limited warranty
24 hour technical support

Related

You may also like…

Downloads

Teledyne SeaBotix – vLBV300

Related products

    Cart